Forza Fuel Analysis
Fuel analysis instruments from Forza International, for model number and description please click the drop-down button next to the ASTM number, further technical specification can be found on the PDF link.
ASTM D4539
Apparatus for the Determination for the filterability of Diesel fuels and Biodiesel blend fuels in automotive equipment at low temperatures.
Model: LTFT-D4539-A-1: Single Position Automated (Pass /Fail) and Manual Apparatus for Low Temperature Filterability Test (LTFT)
ASTM D97 | ASTM D6371
Manual Liquid bath for the cold flow properties analysis
Model CP-D97-L-X : Manual agitated Liquid Bath for Cloud Point, Pour Point and CFPP of Petroleum Products. Four temperature positions models available, with four test jackets on each temperature position
ASTM D1742
Aluminium block (DRY) apparatus for the cold flow properties analysis
Model CP-D97-B-X : Manual aluminum block (DRY) Bench top apparatus, Engineered with Stirling Cryo cooling system capable of reaching -70°C. Four and five temperature position units are available, with four or eight test jackets for each temperature position.
ASTM D2386
Apparatus for the determination of Freezing Point of aviation Fuels
Model FZ-D2386-L-2 : Manual low temperature (-70’c) Liquid bath for the determination of the temperature below which solid hydrocarbon crystals may form in aviation turbine fuels and aviation gasoline. Conforms to method ASTM D2386
ASTM D2274 (DRY)
Apparatus (DRY) for the determination of Oxidation Stability of distillate fuel oil (Accelerated method)
Model: OXY-D2274-IHT-X : Manual Individual heated tube apparatus (dry) for oxidation stability of distillate fuel oil (Accelerated method). 4, 6, and 8 positions models equipped with Rotameter / MFC available.
ASTM D2274 (WET)
Apparatus (Liquid) for the determination of Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
Model: OXY-D2274-L-X : Manual liquid bath for oxidation stability of distillate fuel oil (Accelerated method). 4, 6, 8, 12 and 15 positions models available
ASTM D323
Apparatus for the determination of Vapor Pressure of Petroleum Products (Reid Method)
Model RVP-D323-L-4 : Manual Stainless Steel Liquid Bath for Reid Vapor Pressure Test. 4 Position Model is available.
NACE TM0172
Apparatus for the evaluation of Corrosive Properties of Insoluble Petroleum Product Pipeline Cargoes
Model RU-TM0172-L-6-: Manual Liquid Bath for corrosive properties of liquid petroleum products/liquid hydrocarbon products that are not water soluble, for transport through a steel pipeline. 4 and 6 positions models available.
ASTM D445
Opaque Liquids (and Calculation of Dynamic Viscosity)
Apparatus for the determination of Kinematic Viscosity of Transparent and opaque products
Model HTKV-D445-L-7 : Manual High (40’C to 150’c) and Low (-20’c to -65’c) Temperature Liquid Bath for the determination of the kinematic viscosity of liquid petroleum products, both transparent and opaque.
ASTM D445
Low Temperature
Apparatus for the determination of Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
Model LTKV-D445-L-4: Manual Low (-20’c / -65’c) Temperature Liquid Bath for the determination of the kinematic viscosity of liquid petroleum products, both transparent and opaque.
ASTM D2699 | D2700 | D2885
Refrigerated Air Intake Dehumidifier for CFR Octane Knock Engines
Model OC-IAC-D : Refrigerated Air Intake Dehumdifier / Chiller for Octane Knock Engines, FORZA system, draws in room air, filters that air, and then sends the dehumidified and chilled air into the Octane engine’s carburetor. It is designed to chill the inlet air to 1.5° to 3.5°C.
ASTM D613 | D2699 | D2700 | D2885
Automated Blender for Octane and Cetane Reference Fuels
Forza offers a range of fully automated Octane and Cetane blenders, which conforms to blending requirements outlined in ASTM Standards D2699, D2700, and D613. These blends are then used to determine the knock ratings of fuels in terms of octane or cetane number.
ASTM D4007 | ASTM D2709 | ASTM D96
Heated Centrifuge for the determination of Water and Sediment in oil
Model AG-900-HT: Heated Centrifuge for crude oil or refined petroleum products AG Fuel Analytics Inc, has partnered with Forza International to provide this equipment. Please contact sales@agfuelanalytics.com for more information.
ASTM D4007 |
API STD 2542/48
Oil Sample Heater
Model AG-900-HTR : Apparatus for pre-heating oil samples prior to centrifugation (100mL short cone heaters)
AG Fuel Analytics Inc, has partnered with Forza International to provide this equipment.
ASTM D1298 |
ASTM D287
Constant High Temperature hydrometer Bath (+15’c to +95’c)
Model : SG-D1298-L-12 : Manual high temperature liquid bath, can accommodate 12 hydrometer cylinders for the determination of density, relative density, or API gravity of petroleum products.